Playback Designs IPS-3 User Manual Download Page 7

Page: 7 / 16

IPS-3 User Manual

REMOTE CONTROL UNIT

MUTE

AES

COAX

PLINK

ANA1

ANA2

ANA3

PHSE

DIM

FCT

VOL+/-

All others

Mutes the speaker outputs, but not the digital ones.

Input Selections:

Selects the AES input for conversion to analog.

Selects the COAX input for conversion to analog.

Selects the PlayLink input for connection to USB-X.

Selects the USB input from PC.

Selects analog input 1.

Selects analog input 2.

Selects analog input 3.

The first time this buttons is pressed the alpha-

numeric display indicates the absolute phase for the

digital inputs. If it is pressed again within 5 seconds

the absolute phase is toggled.

Toggles upper display on/off and dims lower volume

display.

Press and hold this button to enter the setup menu

and to display settings. See section "setup menu"

later in this manual for more details.

Increases or decreases volume.

Not used for IPS-3.

Summary of Contents for IPS-3

















Search results

Summary of Contents for IPS-3

Reviews:

Related manuals for IPS-3

Brands by name

Popular brands

Playback Designs IPS-3, User Manual

Search results

Summary of Contents for IPS-3

Reviews:

Related manuals for IPS-3

Brands by name

Popular brands