IPS-3 User Manual
13
.
SETUP MENU
The IPS-3 has several options that can be set via remote control. By pressing and holding the FCT button the
setup menu is displayed on the front panel. After no further button has been pressed for 5 seconds the
display goes automatically back to normal operation. After entering the setup menu the FCT button can be
pressed shortly to advance to the next menu item. Each programmable menu item may be toggled between 2
settings by pressing the play button.
IMPORTANT: Do not attempt to change any settings while the IPS-3 is connected to any PLINK or USB-X
devices. Always disconnect any optical cables.
The following options are available in sequence:
1. Serial number. This option is not user programmable.
2. PLINK Input format: This is currently fixed to the Sonoma format and may be expanded in the future.
3. Firmware version. This option is not user programmable.
4. Temperature: this displays the measured temperature inside the IPS-3.
