7
4.4 Installation of game controller
Now the Game Controller can be installed.
1.
Start by pulliing the rubber ring onto the bottom of the game
controller. It is important the the rubber ring is turned so that the
sides with the greater width is at the back and front of the game controller. Please
note that the display pannel is on the front of the game controller. See illustration “at-
tachment of rubber ring”.
2.
Connect the game controller to the devicenet cable from the
satellite. This will be the cable with the purple stripe. Note that it
is very important that the PlayAlive cable is connected to the game
controller
before
it is connected to the power cable, as failing to
do so will break the electronic parts.
3.
When the satellites have been connected, the power cable can
be connected to the game controller as well. This will be the sec-
ond, and last, cable. Please make sure to follow this order when
connecting the cables.
4.
Now place the game controller in the middle pillar arm.
Make sure that the display on the game controller is fac-
ing forward, as shown in illustration “placement of game
controller“. Fix it with 8 Buttonhead M5 x 12 mm screws.
These components are designed so that the screws can be
screwed in using your fingers. Please do this to avoid possi
-
ble cold welding. If this is not possible please try to adjust
the game controller so the holes are better aligned.
It is advised to hold of on fixing the screws completely until
installation step 5 has been completed, so that you are sure
everything is working correctly.
Important:
Please start
by screwing the screws
in using your fingers, to
avoid possible cold weld-
ing. If this is not possible
try to adjust the game
controller to align the
the holes better. Then try
again, using your fingers.
Notice:
It is advised to
wait until point 5 is com-
plete before fixing the
screws completely.
Notice:
For this installa-
tion step (4.4) it could be
an advantage to be 2 peo-
ple, or more. As some of it
will be defficult to complete
on your own.
Attachment of
rubber ring.
Placement of
game controller.
Important:
Please
make sure to connect
the cables in the order
described in this instal-
lation point. This is very
important as some of the
PlayAlive components
could break if the cables
are installed in the wrong
order.
Summary of Contents for Wave
Page 1: ...Installation manual Wave ...
