10
11
9
Assembly Steps
Backrest
Ø4x12
flat head
screw
Tabs
Seat
Slots
Motor hood
M5x16 machine
screws
2WD
●
Fit the motor hood on the motor.
●
Tighten four
Ø
4x12 flat head screws to
secure it.
●
Repeat for the other side.
●
Fit the motor hood on the motor.
●
Tighten four
Ø
4x12 flat head screws to
secure it.
●
Insert the tabs at the back of the seat
into the slots in the vehicle body.
●
Insert two M5x16 machine screws, and
tighten with a screwdriver.
●
Insert the backrest into the hole in the
vehicle body and push until you hear this
click into place.
