6
7
8
Assembly Steps
Ø4x12 round
head screw
Windshield
UP
Steering wheel
M5x35
Machine screw
Ø5 Nut
Fuse box
Power connector
Motor connector
Vehicle connector
●
Turn the vehicle body upright.
●
Fit the tabs on the windshield into the
slots in the vehicle.
●
Insert two
Ø4x12 round head screws
and tighten with a screwdriver.
●
Remove the M5x35 machine screw
and
Ø
5 nut from the steering wheel.
●
Insert the steering wheel to the end of
the steering column.
●
Insert the M5x35 machine screw
through the steering wheel and steering
column, and tighten the
Ø
5 nut back in
the same location.
●
Plug the power connector into the
terminal on battery as shown.
●
Plug the vehicle connector(s) into the
motor connector(s).