3
USING YOUR KETTLE
Before first use, please follow these instructions:
1. Remove all packaging and any labels.
2. Fill the kettle to the “MAX” level. Boil. Discard the water. Repeat this process twice.
3. Wipe the surface with a damp cloth.
TO USE YOUR KETTLE
1. Fill the kettle through the spout or lid with as much fresh, cold water as you will need. To open
the lid, simply press the lid release button.
2. The water level must between “
MAX
” and “
MIN
”. The maximum water level is indicated in the
middle of the kettle and is marked by the word “
MAX
”.
3. Be economical: do not boil more water than needed.
4. To improve the quality of your drinks always use fresh water.
5. Press the lid close firmly until it locks into position.
Note:
Ensure that the ON/OFF switch is clear of obstructions and the lid is firmly closed. The
kettle will not turn off if the ON/OFF switch is constrained or if the lid is left open.
6. Plug in the power base, and switch unit on by pressing the on/off switch to the “I” position (the
indicator light will turn on when the kettle is working).
7. Your kettle will reach boiling point, and switch off automatically. To re-boil, simply wait a few
seconds then reset the on/off switch.
8. To avoid the risk of splashing, pour slowly and do not over-tilt the kettle. Over tilting the kettle
will split the flow, causing a scald hazard.
9. Empty the kettle after each use.
10. Your kettle is fitted with a filter to hold back lime particles.
BOIL DRY PROTECTION
A safety shut off device will automatically activate should the kettle be accidentally switched “ON”
without any water, or without sufficient water to cover the element, or by allowing to boiling dry.
Should the shut off device be activated, allow your kettle to cool down for a few minutes before
refilling, to permit this device to reset.
CAUTION
1.
When using your kettle, please take note that it will get hot when the water is boiled. Please
use the handle to hold the kettle. After the kettle has switched off automatically (or has been
switched off manually) it may need time to cool down. After 1 minute, the kettle can be
switched on again.
2.
If the kettle ever boils dry, allow 20 minutes to cool before refilling with cold water.
ENGLISH
