SOLAR LIGHTS
CARE AND USE INSTRUCTIONS
2
STEP 1
STEP 2
STEP 3
STEP 4
Do not over-tighten
Remove protective
film from solar
panels.
Turn the switch
underneath the remote
solar panel to “ON”
position.
IMPORTANT NOTES:
Remove protective film from solar panels. To allow each battery to reach full
capacity, pull out the plastic tab and place in full sunlight for the first 12 hours.
Failure to do so can shorten the life of the battery or operation of the light.
To protect the glass from damage, do not use force during assembly. Keep the
glass in the packaging until you need to install it.
GROUND STAKES
Pre-drill a hole into the ground using a screwdriver. Do not make the hole larger than
the ground stake. Insert assembled solar light into the pre-made hole. Do NOT use a
hammer on the ground stakes as you could damage the item.
