28
EVENT SARCH: search play by event list.
START STOP SEARCH: search play by segment.
Push upward and downward button to move cursor, the push enter button to enter submenu you
select, push search button to quit from search menu.
6.8 Time search
When the cursor moves to Time Search, then push enter button, the time search window will
appear, which is illustrated as below.
Their red block means there has video at that time
Push leftward and rightward button to move the cursor among year, month, day, hour and minute,
if you select the year and push enter button you will select month and so it is with day and hour,
Push add and DEC button to modify the time. If you select the minute and that minute has a red
block then you can push enter button to play the video from that time you selected.
6.9 Event Search
When the cursor moves to Event Search, the push enter button, the event search window will
appear, which is illustrated as below.
There are four types of event list: MOTION, ALARM, SCHEDULE and NETWORK. MOTION
means motion alarm recording Alarm means sensor alarm recording, SCHEDULE means time
recording, NETWORK means network recording
Push upward and downward button to move the cursor among the event list, push leftward and
rightward button to see previous or next page, push enter button to play the segment you select.
Push search button back to Search Play menu.
If you want to change the HDD between MASTER HDD and SLAVE HDD, just push mode key,
the push enter key to change, lush menu to give up
6.10 Start Stop Search
When the cursor moves to Start Stop Search, then push enter button, the Start stop search
window will appear, which is illustrated as below.
All record segments are displayed here, push upward and downward button to move the cursor
among the segment list, push leftward and rightward button to see previous or next page, push
enter button to play the segment you select. Push search button back to Search Play menu.
If you want to change the HDD between MASTER HDD and SLAVE HDD, just push mode key,
the push enter key to change, push menu to give up
6.11 USB Backup
Plug in the USB device, go to the menu of Backup set, check that if the USB device was detected
or not, and the free space of the USB device is enough or not, select the backup mode, then quit
the menu setup.
In shift mode, if you select STILL
for the backup mode in the Backup Set menu, push the USB
button, it begin to backup the main out picture to the USB device, there will be a S
blinking on
