22
ALARM ENABLE: alarm trigger switch, you can be set to off, NC or N.O. If users set it to off, the
DVR will ignore the alarm input.
MOTION ENABLE: motion alarm switch, you can be set to on or off. If users set it to off, the
motion alarm will be ignored.
MOTION LEVEL: motion sensitivity level, if the figure in the picture id small, please set to high of
very high, the default is normal.
BUZZER TIME: buzzer sound time when there is a sensor or motion alarm.
SENSOR RECTIME: when a motion or sensor alarm occurred, the DVR record last time, the
default is 1 minute.
Note: users should press schedule button after setting up the parameters so to activate
the settings.
5.6.1 MOTION AREA SET
Turn the Motion Block ON/OFF.