Plastimo 67440, Instruction Manual

Page: 30 / 172

3 4
GET AQUAINTED
■
Appearance
PTT
MIC
CHARGE
q
r
!0
!1
!2
t
y
u
i
o
w
e
Loudspeaker
Microphone
LCD Display
q
[PTT] Key
• Hold down [PTT] to transmit. Speak with normal tone.
• Release [PTT] to receive.
w
Power Key
• Hold down this key for 1 second to power on/off the
radio.
e
Charging Port
• Push down to open the charging port.
• The USB port is for charging only. Cannot support data
communications.
NOTE: Ensure the cover for the DC charging connector
is affixed tightly to avoid water ingress.
r
Earphone Jack (SP/MIC)
• External earphone/microphone jack.
• Revolve the jack counter clockwise to open. Revolve
clockwise to close.
• This jack can be connected with computer for data com-
munication through programming cable.
NOTE: Ensure the cover for the earphone jack is affixed
tightly to avoid water ingress.
t
[SCAN]/[DUAL]
• Press to start or stop scan mode (including normal and
priority scan).
• Hold on 1 second to enter the Dual or Tri-watch mode.
• Push to exit the watch mode.
• Hold this key and [HI/LO] key for 1 second to activate
the Vibration Draining Function.
y
[C/16]
• Press to select Channel 16.
• Hold for 1 second to select Call Channel.
• The factory default for Call Channel is Channel 9.
• When the Call Channel is selected, hold for 3 seconds
to enter the Call Channel programming mode.
• While in the set mode, press this key to exit.
u
[VOL/SQL]/[MONI]
• Press to enter the volume adjustment mode. Press again
to enter the squelch adjustment mode.
• Hold for 1 second to active the Monitor Function.
• Hold this key while power off. Press [ ] at the same
time to power on and enter the set mode.
• While in the set mode, press to select set items.
• While holding this key, press [
Z
] to turn on the Volume
Mute Function. Repeat again to turn off this function.
i
[Hi/Lo]/[LOCK]
• Press to select high or low output power.
• Hold for 1 second to turn Lock Function on or off.
o
[
Y
]/[
Z
]
• Press to select operation channel.
• While in the set mode, press to select the items.
• While in channel scan, press to change the scan direc-
tion.
!0
Antenna Connector
• Connect with 50Ω supplied antenna.
!1
[FAV]/[TAG]
• Press to sequentially select the favorite (TAG) channel
while ignoring untagged channel.
• Hold for 1 second to set or clear the TAG channel.
• Hold this key and power on to clear or set all TAG chan-
nels.
!2
[CH/WX]/[U/I/C]
• Press this key to select normal channel or weather chan-
nel.
• Hold for 1 second to select USA Channel, International
Channel or Canada Channel.
■
Display
There are several kinds of symbols on the LCD display. Each
symbol represent one meaning. Knowing these meaning
helps the operation.
ICON DESCRIPTION
Appear while transmitting.
LOW
Appear while selecting low power.
"LOW" flashes when forced to select low pow-
er because of battery low voltage or radio high
temperature etc.
ATIS Appear while working in ATIS Channel.
USA Select USA Channel.
28