Plastimo 67440, Instruction Manual

Page: 36 / 172

9 10
■
Volume Maximum Function
The Volume Maximum Function can temporarily maximize
the volume level. This function is invalid when the volume lev-
el reaches 31.
1. Hold [VOL/SQL] and press [
Y
] to turn on this function.
• The volume will be maximum.
• The rolling indicator strip appears.
2. Hold [VOL/SQL] and press [
Y
] to turn off.
■
Volume Mute Function
The Volume Mute Function can be activated temporarily. This
function is invalid when the volume level is OF.
1. Hold [VOL/SQL] and press [
Z
] to activate.
• The volume is mute.
• The volume indicator strap flashes.
2. Hold [VOL/SQL] and press [
Z
] to turn off.
■
Automatic Backlight
The Automatic Backlight Function is convenient for night op-
eration. This function can be turn on/off in set mode.
• Press any key except [PTT] to turn on LCD and keypad
backlight.
• The backlight is automatically turned off after 5 seconds
without operation.
■
Key Lock
The Key Lock Function locks all keys except [ ], [PTT],
[VOL/SQL] and [LOCK] to avoid accidental operation of
channel switch.
• Hold [LOCK] for 1 second to turn on/off this function.
■
Vibration Water Draining Function
The Vibration Water Draining Function helps to drain the wa-
ter away from the loudspeaker housing. It can prevent water
ingress to affect the loudspeaker voice quality. The radio
emits a vibrating sound when this function is activated.
• Press and hold [SCAN] and [Hi/Lo] at the same time to ac-
tivate.
• A deep sound emits for 10 seconds to drain water.
• Any key operation is invalid when vibration water draining is
activated.
SCAN OPERATION
■
Scan Types
The Scan Types including normal scan and priority scan, can
be selected in the set mode (Please refer to set mode opera-
tion).
The weather channel will be scanned also if the weather alert
function is activated.
Set TAG channels before scanning. Cancel TAG for channels
not need to be scanned.
Normal scan: Scan TAG channels. Channel 16 won’t be
scanned if it is not set as TAG channel.
Priority scan: Scan Channel 16 during normal scan.
Normal Scan Priority Scan
■
Set TAG Channels
Set TAG (★) for channels need to be scanned. Cancel TAG
(★) which is no need. The untagged channels will be skipped
during the scan period.
D
Set/Cancel Single TAG Channels
1. Press [U/I/C] to select channel group.
2. Press [
Y
] or [
Z
] to select the desired TAG channel.
3. Hold [FAV/TAG] for 1 second to set the current channel
as TAG channel.
• “★” appears on LCD.
4. Hold [FAV/TAG] again for 1 second to cancel the TAG
channel.
• “★” disappears on LCD.
D
Set/Cancel All TAG Channels
1. Power off. Hold [FAV/TAG] and press [ ] to power on.
All TAG channels will be canceled in the selected channel
group.
2. Repeat the above operation to set all channels as TAG
channels.
■
Scan Operation
Set scan resume timer in the set mode.
1. Press [SCAN] to start normal scan or priority scan.
• “SCAN” flashes on LCD.
• “16” appears on the sub channel readout during priority
scan.
• The scan pauses when a signal is received (The resume
time can be set in the set mode).
• Channel 16 is monitored in priority scan.
• Press [
Y
] or [
Z
] to change the scan direction.
2. Press [SCAN] to stop scanning. Or press [PTT], [C/16],
[CH/WX] and [U/I/C] to stop.
34