14
Sun Lounge Assembly Instructions
Remove the plastic film from a PN1
panel.
Note:
If your model includes
polycarbonate panels with UV
protection, there is a single plastic film
indicating the outside. Acrylic panels
are protected by plastic film on both
sides.
Remove the plastic before
installation.
Put the panel in place by gently
curving it so that it enters the side
channels of the columns.
Slide the top of the panel into the
channel in the bottom of the roof.
Continue with the other PN1
panels.
Lower the panel towards the frame.
Continue with this procedure until
all of the PN1 panels are finished.
Panel by panel, circle around the
Sun Lounge and lower the roof into
place. Use the GT1 pin & glazing
tool to guide the corners of the P1
panel into the channels and lock
the completed panel in place with
pins.
Continue with this procedure until
all of the panels are in place and
each connector is locked in place
with pins.
Summary of Contents for Rion Sun Lounge
Page 27: ...25 Notes...
