Planmeca Creo C5, User Manual

Page: 57 / 62

If the first image in this preview is black, it means the print model is not
correctly flush with the build platform, and will not connect correctly during
the initial printing process. Move the print model down in Creo C5 Studio so
it contacts the build platform / printing area.
It is also very important to place sufficient connectors between the print
model and the build platform, to ensure there is sufficient connecting surface
area between the build platform and the model.
14.4 Radio and television interference
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, can cause
harmful interference to radio communications. There is no guarantee,
however, that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, try
to correct the interference in the following ways:
•
Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio or television technician for
help.
The following booklet, prepared by the FCC, also includes useful
information:
How to Identify and Resolve Radio-TV Interference Problems.
The booklet is available from the U.S. Government Printing Office,
Washington, D.C. 20402.
Changes and modifications not expressly approved by the manufacturer or
registrant of this equipment can void your authority to operate this equipment
under FCC rules.
14.5 Serial number capture
Save your printer’s serial number in the configuration. This helps Planmeca
After Sales to provide you with assistance.
14 Troubleshooting
User's manual Planmeca Creo C5 51