Planmeca Creo C5, User Manual

Page: 27 / 62

• resin cartridges
4. From the printer's control panel main screen, touch the Settings button.
5. In the Settings menu, touch the Calibrate build platform option.
Instructions for the calibration procedure is shown also available on the
printer's screen.
6. Loosen slightly the most right build platform attachment screw with 5 mm
Allen key.
7. Touch the Down button to drive the build platform down to touch the
basin.
Note, you must touch continuously the Down button to move the build
platform down.
8. Ensure that the build platform rests evenly towards the basin.
If needed, press by hands the build platform against the basin.
10 Preparations before printing
User's manual Planmeca Creo C5 21