If you have spots on the lenses that will not come off, try using a lens cleaning solution or pre-moistened
lens cleaning tissues and gently rub the spot with soft cloth and avoiding direct finger pressure. Consider
using the lens cap to prop the camera up for cleaning (as shown in figure 4).
Removing the Lens Cap
The lens cap from the 360° camera should be removed by gently pinching or squishing the cap on the sides
covering the lenses and gently pulling the cap off, taking care to avoid touching the lenses.
Laser Scanner
The laser scanner optical window (central, black, plastic cylinder) must be kept free of fingerprints, dirt and
dust for optimal measurement. Wipe it with a soft cloth and avoid scratching the plastic surface. Do not use
any solvents!
System Power Supply
Use only the provided 12V 3.3A power supply, as it was designed to provide sufficient power to charge the
system battery.
WARNING: Using a power supply with inadequate characteristics may damage the battery charging board
and will void the Warranty.
System Battery
PLANIX uses a 7.2V 49.7Wh smart battery manufactured by RRC Power Solutions Inc, model number
RRC2057. See the User Replaceable Accessories section of this manual for sourcing details.
When the PLANIX system is not going to be used for a prolonged period of time, the battery should be
taken out of the camera while the remaining charge level is between 25-75%.
BATTERY WARNINGS
●
Do not open or dismantle batteries.
●
Do not expose batteries to heat or fire. Avoid storage in direct sunlight.
●
Do not short-circuit a battery. Do not store batteries in a box, drawer, or storage container where they may
short-circuit each other or be short-circuited by other metal objects.
●
Keep batteries clean and dry.
●
Do not subject batteries to excessive mechanical shock. In the event of a battery leaking, do not allow the liquid to
come in contact with the skin or eyes. If contact has been made, wash the affected area with clean water and
immediately seek medical advice.
●
Do not use any charger other than that specifically provided for use with the equipment. See “Charging” section.
Observe the plus (+) and minus (–) marks on battery and equipment and ensure correct use.
●
Never use batteries of different capacity, size, type, or manufacturer within a PLANIX device.
●
Keep batteries out of the reach of children at all times.
●
Never use the PLANIX battery in an application for which it was not intended.
●
For optimal battery health, do not store fully charged or fully discharged batteries for longer than 1 month
without use. Do not store PLANIX batteries for longer than 1 year without recharge.
●
A fully charged battery can remain in the camera for 3 months before it discharges completely and enters a
shutdown state. Batteries not charged within 1-2 days of entering a shutdown state (completely discharged)
may require replacement.
●
All PLANIX batteries must be recycled or disposed of in accordance with national and local regulations. Contact your
local representative for assistance. The batteries must be disposed only in a discharged state at the collection
center.
Setup
➤
Connect
➤
Survey
➤
Stitch
8
Summary of Contents for iGUIDE PLANIX
Page 1: ...Instruction Manual v1 0 ...
