Copyright 2017 Planika Sp. z o.o.
www.planikafires.com
i1086#04
18.10.2017
5
The difference in level between the ends of the furnace must not exceed 2 mm. Poor levelling may cause
abnormal operation of the device and, in extreme cases, it can cause leaks of the Fanola ® liquid and the
danger of fire.
Then connect the supplied cable with a connection block at the end of the cord. Note that connection to the
mains must be made by a qualified electrician. The furnace assembly "A" is connected to mains now. Set it
in the prepared cavity.
Level the surface of the cavity.
The deviation cannot exceed
2 mm (1/16 in)
Connection to the mains must be
made by a qualified electrician.
