Copyright Planika Sp. z o.o.
www.planikafires.com
6
B.
Initial start-up of the device
1.
On the control panel the blue light flashes
it indicates the lack of fuel in the tank. Please refuel.
2.
Refuelling. For refuelling please use the automatic fuel pump provided with the
PrimeFire
.
Before use please read the instructions written on the pump.
LED
Sound
signal
Open the filler fuel flap placed on the right side of the
PrimeFire
. The diode will start to blink and you will hear the
intermediate sound.
--
Attach the metal fuel hose connector to the matching socket
underneath the filler flap. Properly attached fuel connector
should make a click sound. Plug the automatic fuel pump
power cord to the matching socket underneath the fuel filler
flap. Both should be placed firmly in their place.
--
Place the stiff tube in the external fuel container from which
the fuel will be pumped out into the
PrimeFire’s
fuel tank.
--
To start the automatic pump squeeze the rubber manual
pump several times until you will hear the buzzing noise.
--
Automatic fuel pump will start working once the fuel reaches the sensor inside the black box. Pump will cease the refuelling
process once:
a)
PrimeFire’s
fuel tank will be full.
LED diode will start to blink and you will hear the intermediate sound.
b)
The external fuel tank will be empty. In this case, connect another external fuel tank and re-pour or finish.
If you want to finish the refuelling disconnect the power connector. Hold the fuel hose connector and press the metal plate under
it (marked with a red circle) The connector will be released. Please be aware, that some fuel can still be present in the fuel hose
after releasing. Close the fuel filler lid.
F U E L
FUEL
FUEL
FUEL
FUEL
FUEL
