Copyright Planika Sp. z o.o.
www.planikafires.com
10
V.
Cleaning and maintenance
Switch off the device before cleaning. Wait until the temperature of the device gets close to the ambient temperature. To maintain
appropriate technical condition of the device, please observe the following rules:
•
Lacquer coating the furnace is not resistant to abrasion. It is not recommended to wipe the surface.
•
Clean the furnace with a soft cloth and water to avoid causing cracks and scratches
When purchasing and dozing cleaners, be sure to protect the environment and comply with the recommendations of
manufacturers.
It is forbidden to clean the inside of the device by unauthorized persons.
The manufacturer does not foresee a situation where it will be necessary to clean elements not normally available.
The manufacturer is not liable for damage resulting from:
improper operation (non-manual)
self-dismantling
attempts to modify
using other liquids than those recommended in point II. Fuel.
VI.
Disposal and recycling
The product is equipped with parts made of aluminium, steel, plastics and electronics. If you need to dispose of the device, follow
the terms of disposal and recycling in force in your country.
Moreover, dispose of the empty Fanola containers should be dumped to plastic waste baskets.
Most of the materials used in Planika appliances can be recycled.
FANOLA® fuel recommended for this product has received following certifications:
VII.
Service
If you have any technical problems or some questions, please do not hesitate to contact your distributor or visit our page
www.planikafires.com/service
and follow the instructions on the page.
