Copyright Planika Sp. z o.o.
www.planikafires.com
IG0222#03
03.10.2019
17
Open the valve on gas cylinder.
Press the knob and while still pressing turn it counter-clockwise from position (1) to position (2)
Photo 5
While keeping the knob still pressed start the flame by pressing the ignition button (3).
Photo 6
A spark will appear which ignites the main burner on the minimum flame height. If the flame did not ignite
repeat this process 2-3 times. This will be required especially when you have replaced and installed a new LPG
gas cylinder.
When the flame is ignited keep holding the knob for around 5 seconds until the thermo-couple, which will
keep the main valve in an open position, warms up.
You may now release the knob. If however the flame is extinguished repeat the process once again until a
stable flame is achieved.
WARNING!!!
After 2-3 unsuccessful attempts terminate and check the connections. Try again in 10 minutes.
If the installed gas bottle is new or the fireplace has not been used for a longer period the first thing that needs
to be done is to release air from the gas linkage. In this case conducting a few attempts will be needed until
the flame is ignited.
