79
Mini300
4. A window labeled “Add Port” will be displayed. Click on the NetBEUI
tab. After a while, the wizard detects your print server. The numbers
below “PID” correspond to the port numbers of the Mini300. To print
from a printer attached to Port2, select the line whose PID is 2.
※
If your print server is not detected, refer to Section 4-2-a in Chapter 4 and
check whether NetBEUI protocol has been installed.
78
Mini300
2. In the next screen, click on the “Add Port” button to continue.
3. Select “PS Port” and click on the New Port button.
※
The PS Port item will not be shown if the utility is not installed properly.
Please go to Section 3-2 in Chapter 3 and install the program using the
supplied setup diskette.
Summary of Contents for Mini300
Page 2: ......
