manualshive.com logo in svg

Planex Mini300, User Manual

Share
Download
Planex Mini300 User Manual Download Page 17

15

6. After the software has been installed, the following screen will be

displayed.  Click on the Finish button to exit the installation wizard.

■

Uninstalling the Utilities

To uninstall the utilities, first click on the Start button and select [Settings]

and then [Control Panel].   Click on an item labeled “Planex Print Server for

WindowsNT” and then click on the “Add / Remove” button.  The Mini300

utility (utilities) will be uninstalled from the system.  

※

To use Smart Print Manager 2, IPX protocol is required.  If you are using

Wi n d o w s N T, add “NWLink IPX/SPX compatible transport”.  For more

details, refer to the section on adding IPX/SPX protocol in Chapter 4. 

Mini300

14

Mini300

4. In the next screen, you can change the target directory.  If the default path

is okay, simply click on the Next button to continue.

5. The next screen allows you to decide which utility to install.  Install “PS

Port” to your PC if you plan to print without using a WindowsNT or

N e t Ware server.  “Smart Print Manager 2” is used to configure the

Mini300, and is not used to print documents.  Install this utility only to

the PC from which you plan to configure the print server.  After you have

selected which utilities to install, click on the Next button to initiate

software installation.

※

If you are using LPR port to print via TCP/IP, you do not need to install

“PS Port”.

Summary of Contents for Mini300












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands