5
FX-16IM
●
Cabling
1.10Mbps-Category 3, 4 or 5 TP cabling can be used for transmitting data at
10Mbps or 20Mbps on 10BASE-T networks.
2.100Mbps-Only Category 5 TP cabling can be used for transmitting data at
100Mbps or 200Mbps on 100BASE-TX networks.
Note:
Category 5 TP cable is also recommended whenever installing new cabling.
■
Rear Panel
●
Power Connector
T he power co nnecto r i s des ign ed to be us ed wit h th e p ower adap ter
included in the product package.
4
FX-16IM
●
Status LEDs
The LED i ndicators wil l help yo u monit or the stat us of each port and
connected segment. The functions of the LEDs indicators are described as
follows.
■
Front Panel
The front panel contains 16-port 10/100Mbps RJ-45.
●
10/100Mbps TP Ports
Each port has supported for an Auto-Negotiation function and an Auto-
MDI/MDIX function that senses the attached device's maximum operating
bandwidth and automati cally set s the connected port t o operate at 10/100
Full-/Half-Duplex.
●
Port Connectors
Each TP port uses R J-45 connectors that all ow network TP cabl es to be
quickly attached or removed.
2-2
2-3
