manualshive.com logo in svg

Planex FMX-24P, User Manual, Page: 43 / 78

Share
Download
Planex FMX-24P User Manual Download Page 43

FMX-24P 

USER’S MANUAL 

 

42

PLANEX COMMUNICATIONS INC.

 

1) Configure Port From 

Use this option to specify the range of ports you wish to configure.   
 

2) Diffserv 

Use this option to configure Diffserv status. 
[Disabled]        Diffserv is disabled 
[DSCP]                      DSCP is used 

Mode:  
       [Force Overwrite] 
                    DSCP value is overwritten with the value specified here. 
 
              [Change if 0] 
                      The value entered here will be used if DSCP value is zero.     
 
DSCP value: 
    Enter the DSCP value you wish to configure. 
 
 

[TOS]  :  TOS will be used. 

Mode: 
    [Force Overwrite] 
      TOS value is overwritten with the value entered here.   
    [TOS Overwrite 802.1p] 
      TOS priority value is checked and is overwritten with CoS value.   
 
    [802.1p Overwrite TOS] 
       CoS priority value is checked and is overwritten with TOS value.   
 

TOS Value: 
    Enter the TOS value you wish to configure.   
 
3) APPLY 

Use this option to store the current configuration to DRAM.    Select APPLY to 
modify and update the configuration of the switch that is currently running. 

 

Summary of Contents for FMX-24P















































































Reviews:

No comments