manualshive.com logo in svg

Planex FMX-24P, User Manual, Page: 18 / 78

Share
Download
Planex FMX-24P User Manual Download Page 18

FMX-24P 

USER’S MANUAL 

 

17

PLANEX COMMUNICATIONS INC.

 

 

1) Auto-Logout 

After the switch has logged onto the management screen, the product will 
automatically log off if there is no key input for the duration specified here.  
Available duration options are as follows: 
2mins / 5mins / 10mins/ 15mins/ Never 
The factory default is 10mins.   

 
2) MAC Address Aging Time (sec): 

This option is used to specify the duration for which dynamically learned MAC 
addresses are retained.  A value between 10 and 1,000,000 sec may be 
selected, and the factory default is 300 sec.   
*) It is strongly recommended NOT to change this parameter unless there is a 

specific reason to do so.   

 
3) Switch GVRP 

The product does not support this feature. 

 
4) Telnet Status 

Enables or disables Telnet-based remote configuration.    The factory default is 
"ENABLED".  

 
5) Web Status 

The product does not support this feature. 

 
6) Group Address Filter Mode 

Summary of Contents for FMX-24P















































































Reviews:

No comments