FMX-24P
USER’S MANUAL
14
PLANEX COMMUNICATIONS INC.
2)
IP Address
This option is used to set an IP address. To prevent invalid IP configuration,
the following rules have been applied:
1.
Class D addresses will be ignored when they are entered.
2.
Addresses that end with 0 or 255 are ignored.
3.
If a network address and/or broadcast address is entered when a
variable-length subnet mask is in use, the subnet mask setting will
revert to the default value when enabling the new configuration.
3)
Subnet Mask
This option is used to configure subnet mask. Should a subnet mask that is
inconsistent with the preconfigured IP address be entered, the default value
is restored upon enabling the new (modified) configuration. Invalid entry
will be ignored, and the factory default is 255.0.0.0.
4)
Default Gateway
This option specifies the address of a default route that is used to remotely
configure and manage the switch from a separate network. Enter 0.0.0.0 if
you do not wish to use a default gateway. For this option, the switch will
not check for invalid entries.
5)
Management VID
This option defines the management VLAN-ID that is used to configure the
switch. The product can be configured via one management VLAN.
6)
APPLY
Use this option to store the current configuration to DRAM. Select APPLY
to modify and update the configuration of the switch that is currently
running.
[Note]
IP address configuration must be performed before adding a network device to a
network. IP address overlapping (two or more devices in the same network
having the same IP address) may result in serious communication failure.
Summary of Contents for FMX-24P
Page 1: ......