Planex BLW-54PM User Manual Download

Page: 64 / 67

Options

Respond to
ICMP

The ICMP protocol is used by the

ping

and

traceroute

programs, and

by network monitoring and diagnostic programs.

•

If checked, the BLW-54PM will repond to ICMP packets received
from the Internet.

•

If not checked, ICMP packets from the Internet will be ignored.
Disabling this option provides a slight increase in security.

Allow IPsec

The IPSec protocol is used to establish a secure connection, and is
widely used by VPN (Virtual Private Networking) programs.

•

If checked, IPSec connections are allowed.

•

If not checked, IPSec connections are blocked.

Allow PPTP

PPTP (Point to Point Tunneling Protocol) is widely used by VPN
(Virtual Private Networking) programs.

•

If checked, PPTP connections are allowed.

•

If not checked, PPTP connections are blocked.

Allow L2TP

L2TP is a protocol developed by Cisco for VPNs (Virtual Private
Networks).

•

If checked, L2TP connections are allowed.

•

If not checked, L2TP connections are blocked.

Summary of Contents for BLW-54PM




































































Search results

Summary of Contents for BLW-54PM

Reviews:

Related manuals for BLW-54PM

Brands by name

Popular brands

Planex BLW-54PM, User Manual

Search results

Summary of Contents for BLW-54PM

Reviews:

Related manuals for BLW-54PM

Brands by name

Popular brands