Planex BLW-54MF, User Manual

Page: 44 / 78

2
39
Chapter 2 Basic Setup & Configuration
many Internet Service Providers (ISPs). RADIUS setup is used to set up
additional parameters for authorizing wireless clients through RADIUS
server. The RADIUS setup is required when you select to use
WPA
authentication.
œ
Cancel
Ĉ
If you do not want to configure this setting right now, click this
button to exist this page.
œ
Apply
Ĉ
Click this button to save/apply the settings and restart the
system.
6.3 Advanced
œ
Beacon Interval
Ĉ
Beacon Interval is the amount of time between
beacon transmissions. Before a station enters power save mode, the
station needs the beacon interval to know when to start up again and
receive the beacon.
œ
RTS Threshold
Ĉ
Here you can define the minimum value of RTS
(Request to Send) packets and prevent
ņ
Hidden Nodes
Ň
problems.
Please enter a value between 0~2346, and when the packets are bigger
than the RTS value the function will start to work.
œ
Fragment Threshold
Ĉ
This value can define the maximum packet
sized, so the packets bigger than this size will be segmented. If you set
the lower value, and found there is higher packets error value, you can
set the value higher, however, that may decrease the whole performance
of BLW-54MF. The default value is 2346 , and you can set a value
between 256~2346.