Planex BLW-54MF User Manual Download Page 28

Page: 28 / 78

Chapter 2 Basic Setup & Configuration

GateWay

Enter the default Gateway address provided by your ISP.

DNS 1~3

Enter the DNS IP address provided by your ISP.

MAC Address

The default MAC address of BLW-54MF is the

Network Interface Card's (NIC) MAC address on the WAN side. If you

were asked to use the NIC provided by the ISP, you may click

Clone

MAC Address

and enter the MAC address of NIC provided by the

ISP. We do not suggest you to change the default MAC address, if your

ISP does not ask you to change it.

Cancel

If you do not want to configure this setting right now, click this

button to exist this page.

Apply

Click this button to save/apply the settings and restart the

system.

PPPoE

WAN IP Address

Please choose the service provided by your ISP.

Service Name(optional)

If your ISP provides you Service Name,

please enter the provided information.

User Name

Please enter the User Name/Account provided by your

ISP. (case-sensitive)

Password

Please enter the Password provided by your ISP. (case-

sensitive)

Summary of Contents for BLW-54MF














































































Search results

Summary of Contents for BLW-54MF

Reviews:

Brands by name

Popular brands

Planex BLW-54MF, User Manual

Search results

Summary of Contents for BLW-54MF

Reviews:

Brands by name

Popular brands