MAC Address:
If required by your ISP, type the MAC address for the WRT-410A WAN interface in this
field. You can also copy the MAC address of your PC’s network card to the WRT-410A WAN interface
by clicking “Clone MAC address”.
When using PPPoE, enter the following information in the fields (some information are provided by your
ISP):
WAN IP:
Select whether you want the ISP to provide the IP address automatically, or whether you want
to assign a static IP address to the WRT-410A WAN interface. When “Specify IP” is selected, type the
PPPoE IP address in the field. Your ISP will provide you with this information.
Server Name:
Enter the ISP server name (optional).
User Name:
Type your PPPoE user name.
Password:
Type your PPPoE password.
DNS:
Type the primary and secondary DNS server addresses (static PPPoE only). Your ISP will provide
you with this DNS information.
Auto-reconnect:
Select either Always-on, Manual, or Connect-on Demand..
Idle Time Out:
Specify the time that will elapse before the WRT-410A times out of a connection.
MTU:
Type the MTU value in the field.
- 8 -
