Enable:
Click to enable or disable the IP address filter.
Range Start:
Type the minimum address for the IP range. IP addresses falling between this value and
the Range End are not allowed to access the Internet.
Range End:
Type the minimum address for the IP range. IP addresses falling between this value and the
Range Start are not allowed to access the Internet.
Add:
Click to add the IP range to the table at the bottom of the screen.
Update:
Click to update information for the range if you have selected a list item and have made
changes.
Delete:
Select a list item and click “Delete” to remove the item from the list.
Clear:
Click “Clear” to erase all fields and enter new information.
Select Domain Blocking, and the following screen appear.
Domain Blocking:
There are three options in this field. Select the proper setting according to your
demand.
Permitted Domains:
Enter the domain name in the text field, and click “Add” button to add it to the list.
Blocked Domains:
Enter the domain name in the text field, and click “Add” button to add it to the list.
Select Protocol Filter, the screen appears as below. It enables you to allow or deny access based upon a
communications protocol list you create. The protocol filter profiles are listed in the table at the bottom of
the page.
- 23 -
