Metric:
Select which metric you want to apply to this configuration.
Add:
Click to add a configuration to the static IP address table at the bottom of this page.
Update:
Select one of the entries in the static IP address table at the bottom of the page and, after
changing parameters, click “Update” to confirm the changes.
Delete:
Select one of the entries in the static IP address table at the bottom of the page and click “Delete”
to remove the entry.
New:
Click “New” to clear the fields and add required information to create a new entry.
3.4.2 Dynamic
This screen allows you to set the NAT parameters.
NAT:
Select the option to enable or disable NAT.
Transmit:
Select the option to set the desired transmit parameters. Disabled, RIP 1 or RIP 2.
Receive:
Select the option to set the desired transmit parameters. Disabled, RIP 1 or RIP 2.
3.4.3 Routing Table
This screen will show you the routing table of WRT-410A. The routing table is a database created by the
WRT-410A that displays the network interconnection topology.
- 20 -
