Enable 802.1x Authentication
nt to enable
Check this box and another sub-menu will appear if you wa
802.1
x
authentications with WEP encryption. You may refer to section
5.4.3.2 to enter the correct setting of the fields.
After configuration complete, ple
n. Then you will see a
r
5.4.3.2 802.1X
ntication protocol. Every user must use a valid account to login to this Access
ase click “Apply”
button to save the configuratio
screen to prompt you the settings are saving successfully. You may press “Continue” for configure othe
settings or “Apply” to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more
information about this screen.
IEEE 802.1x is an authe
Point before accessing the wireless LAN. The authentication is processed by a RADIUS server. This
mode only authenticates user by IEEE 802.1x, but it does not encryption the data during communication.
It is suggested to enable 802.1x and WEP at the same time.
Parameter
Description
RADIUS Server IP address
he IP address of radius server here.
Please input t
RADIUS Server Port
Please input the port number of radius server here. Leave the default
port setting or assign a new port number for this option.
RADIUS Server Password
Please input the port number of radius password here.
After configuration complete,
you will see a
5.4.3.3 WPA - PSK
) is an advanced security standard. You can use a pre-shared key to
) to
please click “Apply”
button to save the configuration. Then
screen to prompt you the settings are save successfully. You may press “Continue” for configure other
settings or “Apply” to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more
information about this screen.
Wi-Fi Protected Access (WPA
- 35 -
authenticate wireless stations and encrypt data during communication. It uses TKIP or CCMP (AES
change the encryption key frequently. So the encryption key is not easy to be broken by hackers. This
can improve security very much.
