Mode
Shows the current operation mode. You may set WNRT-620 to other operating
mode by select other operating mode.
Band
2.4GHz (B):
It forces the WNRT-620 to operate in 802.11b only. (maximum transfer
rate 11Mbps)
2.4GHz (G):
It forces the WNRT-620 to operate in 802.11g only. (maximum transfer
rate 54Mbps)
2.4GHz (N):
It forces the WNRT-620 to operate in 802.11n only. (maximum transfer
rate 108**Mbps).
2.4GHz (B+G):
It allows the WNRT-620 to operate in 802.11b and 802.11g
simultaneously. (maximum transfer rate 11Mbps for 802.11b clients, and maximum
54Mbps for 802.11g clients)
2.4GHz (B+G+N):
It allows the WNRT-620 to operate in 802.11b, 802.11g, and
802.11n simultaneously. (maximum transfer rate 11Mbps for 802.11b clients,
maximum 54Mbps for 802.11g clients, and maximum 108**Mbps for 802.11n
clients)
ESSID
The ESSID (up to 32 printable ASCII characters) is the unique name identified in a
WLAN. The ID prevents the unintentional merging of two co-located WLANs.
Please make sure that the ESSID of all stations in the same WLAN network are the
same. The default value is “
default
”.
Channel Number
Select the appropriate channel from the list provided to correspond with your
network settings. Channels differ from country to country.
Channel 1-11 (North America)
After configuration complete, please click “Apply”
button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press “Continue” for configure other
settings or “Apply” to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more
information about this screen.
6.1.2
AP Bridge Mode
Point to Point
Mode
- 60 -
This function allows WNRT-620 to bridge 2 wired Ethernet networks wirelessly.
