background image

The information items are list
 

ed below: 

Object 

Description 

MAC Address 

o the this AP. 

The unique hexadecimal manufacturer-assigned identifier of a device 
connected t

Client ID 

ith a maximum of 32.

 

An ID number assigned to each device on your AP's network, starting 
at 2 w

Power Saving Mode 

rts 

Indicates whether the connection with the associated device suppo
power-saving. 

Tx Rate (Mbits) 

a transfer 

ulation 

and coding scheme) index value applied in a connection, the BW 
(bandwidth), GI (guard interval), and the transmission rate of the 

nnection in megabits (Mbit). 

Provides detailed information on factors affecting the dat
rate. IEEE 802.11n specific information includes the MCS (mod

current co

 

 Mode) 

The “

About

” screen provides you the information about version number of the configuration utility, 

driver, and other important information about your wireless access point. 
 

5.5  About (AP

 

 
The information items are listed below: 
 

Object 

Description 

Utility Version 

Shows the version number of the Utility (different from the utility 
version in station mode).   

Driver Version 

Shows the version number of this driver (the same as that in station 
mode). 

DLL Version 

Displays the version number of the RaAPAPI.dll file, for use by 
downstream developers. 

Date 

Shows the date of release for the utility version shown. 

Date 

Shows the date of release for the driver version shown. 

 57

Summary of Contents for WNL-U554M






































































Reviews: