User’s Manual of WGSW-20160HP
The page includes the following fields:
Object
Description
There are three modes for PoE mode.
Enable
: enable PoE function..
Disable
: disable PoE function.
Schedule
: enable PoE function in schedule mode.
PoE Mode
Indicates the schedule profile mode. Possible porifles are:
Profile1
Profile2
Profile3
Profile4
Schedule
Allows user to select 802.3at or 802.3af compatibility mode. The default vaule is
802.3at mode. This function wil affect PoE power reservation on Classification
power limit mode only, as 802.3af mode, system is going to reserve 15.4W
maximum for PD that supported Class3 level. As IEEE 802.3at mode, system is
going to reserve 30.8Watts for PD that support Class4 level. From class1 to
class3 level on the 802.3at mode will be reserved the same PoE power with
802.3af mode.
AF/AT Mode
The Priority represents PoE ports priority. There are three levels of power priority
named
Low
,
High
and
Critical
.
The priority is used in the case when total power consumption has been over
total power budget. In this case the port with the lowest priority will be turn off,
and offer power for the port of higher priority.
Priority
It can limit the port PoE supply watts. Per port maximum value must less than
30.8 watts
, total ports values must less than the Power Reservation value.
Once power overload detected, the port will auto shut down and keep on
detection mode until PD’s power consumption lower than the power limit value
Power Allocation
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
323
