User Manual of WDAP-C7200AC/WDAP-W7200AC
-75-
SSID” can provide better wireless network security.
Default is “
Enabled
”.
Data Rate
Set the wireless data transfer rate to a certain value. Since most of
wireless devices will negotiate with each other and pick a proper data
transfer rate automatically,
it’s not necessary to change this value
unless you know what will happen after modification.
Default is “
Auto”
.
Enable Mac Clone
(Single Ethernet Client)
Enable Mac Clone.
Example of how to configure
Client Mode
. Please take the following steps:
To configure each wireless parameter, please go to the “
WLAN2 (2.4GHz)
→
Basic Settings
” page.
Step 1.
Go to the “
WLAN2 (2.4GHz)
→
Site Survey
” page and click “
Site Survey
”.
Figure 5-59
Client – Survey