User Manual of WDAP-C7200AC/WDAP-W7200AC
-79-
The page includes the following fields:
Object
Description
Disable Wireless LAN
Interface
Check the box to disable the wireless function.
Band
Select the desired mode. Default is “
2.4GHz (B+G+N)
”. It is strongly
recommended that you set the Band to “2.4GHz (B+G+N)”, and all of
802.11b, 802.11g, and 802.11n wireless stations can connect to the
WDAP-C7200AC/WDAP-W7200AC.
2.4 GHz (B)
: 802.11b mode, rate is up to 11Mbps
2.4 GHz (G)
: 802.11g mode, rate is up to 54Mbps
2.4 GHz (N)
: 802.11n mode, rate is up to 300Mbps(2T2R)
2.4 GHz (B+G)
: 802.11b/g mode, rate is up to 11Mbps or 54Mbps
2.4 GHz (G+N)
: 802.11g/n mode, rate is up to 54Mbps or 300Mbps
2.4 GHz (B+G+N)
: 802.11b/g/n mode, rate is up to 11Mbps,
54Mbps, or 300Mbps
Mode
There are four kinds of wireless mode selections:
AP
Client
WDS
AP+WDS
If you select WDS or AP+WDS, please click “
WDS Settings
” in the
submenu for the related configuration. Furthermore, click “
Multiple
AP”
to enable multiple SSID function.
Channel Width
You can select
20MHz
, or
40MHz
Control Sideband
You can select
Upper
or
Lower
.
Channel Number
You can select the operating frequency of wireless network.
Data Rate
Set the wireless data transfer rate to a certain value. Since most of
wireless devices will negotiate with each other and pick a proper data
transfer rate automatically,
it’s not necessary to change this value
unless you know what will happen after modification.
Default is “
Auto”
.
AP+ WDS
Connect this Wireless AP with up to 8 WDS-capable wireless APs, and connect another AP to provide
service for all wireless stations within its coverage.
