Planet WDAP-C1750 User Manual Download Page 75

Page: 75 / 124

User Manual of WDAP-C1750

-65-

5.4.5 I’m Here

The access point features a built-in buzzer which can sound on command using the “I’m Here” page. This is
useful for network administrators and engineers working in complex network environments to locate the access
point.

Figure 5-37

I’m Here

The page includes the following fields:

Object

Description

Duration of Sound

Set the duration for which the buzzer will sound when the “Sound

Buzzer” button is clicked.

Sound Buzzer

Activate the buzzer sound for the above specified duration of time.

5.5 Advanced

5.5.1 Reboot Schedule

This function allows you to enable and configure system reboot schedule. The device can regularly reboot

according to the reserved time when connecting to the Internet.

Figure 5-38

Reboot Schedule

Summary of Contents for WDAP-C1750





























































































































Search results

Summary of Contents for WDAP-C1750

Reviews:

Related manuals for WDAP-C1750

Brands by name

Popular brands

Planet WDAP-C1750, User Manual

Search results

Summary of Contents for WDAP-C1750

Reviews:

Related manuals for WDAP-C1750

Brands by name

Popular brands