Planet WDAP-C1750, User Manual, Page: 92 / 124

User Manual of WDAP-C1750
-82-
“ Static IP Address ” to manually specify a static/fixed IP address
for your access point (below). Check the box “ Override Default
Setting ” if the AP is a member of an AP Group and you wish to use
a different setting than the AP Group setting.
IP Address Specify the IP address here. This IP address will be assigned to
your access point and will replace the default IP address.
Subnet Mask Specify a subnet mask. The default value is 255.255.255.0
Default Gateway
For DHCP users, select “ From DHCP ” to get default gateway from
your DHCP server or “ User-Defined ” to enter a gateway manually.
For static IP users, the default value is blank.
Primary DNS DHCP users can select “ From DHCP ” to get primary DNS server’s
IP address from DHCP or “ User-Defined ” to manually enter a
value. For static IP users, the default value is blank.
Secondary DNS DHCP users can select “ From DHCP ” to get secondary DNS
server’s IP address from DHCP or “ User-Defined ” to manually
enter a value. For static IP users, the default value is blank.
6.4.1.2.
VLAN Settings
Figure 6-11 NMS Settings—Access Point VLAN Settings
Object Description
Wired Port Identifies LAN port.
VLAN Mode
Check the box “ Override Default Setting ” if the AP is a member of
an AP Group and you wish to use a different setting than the AP
Group setting. Select “ Untagged Port ” or “ Tagged Port ” specified
LAN interface.
VLAN ID Set a VLAN ID for specified interface, if “ Untagged Port ” is
selected.
Management VLAN ID
Specify the VLAN ID of the subnet.
Hosts belonging to the subnet can only communicate with other
hosts on the same subnet.