MB502 6” Deluxe Jointer
14
3. Thread set screw (A) Fig. 18, which was removed in
STEP 1
, back into post (B) to
keep cutterhead guard (C) in position during jointer operation.
4. Fig. 18, illustrates the cutterhead guard (C) assembled to the infeed table.
Fig. 18
EXTENSION CORDS
1. In the event of an electrical malfunction or breakdown, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. This tool is
equipped with an electric cord having equipment grounding conductor and a grounding
plug. The plug must be plugged into a grounding outlet. The plug must be plugged into a
matching outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
2. Do not modify the plug provided. If it will not fit the outlet, have the proper outlet
installed by a qualified electrician.
3. Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. The conductor with insulation having an outer surface that is green with or
without yellow stripes is the equipment-grounding conductor. If repair or replacement of
the electric cord or plug is necessary, do not connect the equipment-grounding conductor
to a live terminal.
4. Check with a qualified electrician or service personnel if the grounding instructions are
not completely understood or if in doubt as to whether the tool or outlet is properly
grounded.
Summary of Contents for MB502
Page 31: ...MB502 6 Deluxe Jointer 3 Fig 72 Fig 73 ...
Page 32: ...MB502 6 Deluxe Jointer 1 ...
Page 34: ......