Planet IPX-2100 User Manual Download

Page: 99 / 143

Internet Telephony PBX System

IPX-330/IPX-2100

Item

Explanation

IPSec Remote

Network

Specify the IPSec VPN client LAN network address.

1. If the IPPBX is behind NAT, port 500 and 4500 need to be opened on the

router/firewall.

2. If the IPPBX connects to Internet via PPPoE, then IPSec Local IP needs to be the

IP address assigned by PPPoE.

3. IPSec VPN server can connect 3 IPSec clients.

4.3.4.2 IPSec VPN server (Transport mode)

IPSec Transport mode is used for end-to-end communications, NAT traversal is not supported

with the transport mode. So if two IP PBX's connected via IPSec transport mode, IPSec only

encrypts the communication service ports, not like Tunnel mode which encrypts the whole LAN

subnet.

Check the IPSec radio button.

Item

Explanation

Enable

Tick the checkbox to enable IPSec VPN server.

Type

Select Transport mode.

IPSec Local IP

IPPBX WAN IP.(Same as configuring Tunnel mode)

IPSec Password

Define a password for authentication of the IPSec client.

Summary of Contents for IPX-2100
















































































































































Search results

Summary of Contents for IPX-2100

Reviews:

Related manuals for IPX-2100

Brands by name

Popular brands

Planet IPX-2100, User Manual

Search results

Summary of Contents for IPX-2100

Reviews:

Related manuals for IPX-2100

Brands by name

Popular brands