manualshive.com logo in svg

Planet IPX-2100, User Manual, Page: 73 / 143

Share
Download
Planet IPX-2100 User Manual Download Page 73

 

Internet Telephony PBX System 

IPX-330/IPX-2100 

 

73

Outbound CID 

Only works if the call was placed out through VoIP trunks. 

DialPlan 

Defines which type of numbers the web extension can dial. 

Transport 

WS or WSS 

WS 

WS (WebSocket) Protocol is an independent TCP-based protocol 

providing full-duplex communication channels over a single TCP 

connection. The WebSocket protocol was standardized by the IETF as 

RFC 6455 in 2011, and the WebSocket API in Web IDL is being 

standardized by the W3C. 

WSS 

WSS (WebSockets over SSL/TLS), like HTTPS, WSS is encrypted and 

we strongly recommend the secure wss:// protocol over the insecure 

ws:// transport. A variety of attacks against WebSockets are almost 

impossible if the transport is secured. 

 

Step 2: 

Upgrade Web extension patch 

As you can see, web extensions use different protocols for signaling and media (WS/WSS) 

and they are not ordinary SIP/IAX2 extension that can use IP phones or softphones to register 

so must be treated differently. 

 

Summary of Contents for IPX-2100
















































































































































Reviews:

No comments