Planet IPX-2100 User Manual Download Page 103

Page: 103 / 143

Internet Telephony PBX System

IPX-330/IPX-2100

103

Item

Explanation

IPSec Local IP

WAN port IP which can connect to the IPSec server.

Server Address

Specify the IPSec server IP.

IPSec Password

Specify the IPSec VPN password defined previously on the server.

IPSec Remote

Network

The IPSec VPN server LAN network address.

4.5 DHCP

server

DHCP (Dynamic Host Configuration Protocol)is a standardized network protocol used on

Internet Protocol (IP) networks for dynamically distributing network configuration parameters,

such as IP addresses for interfaces and services.

With DHCP, computers/IP phones request IP addresses and networking parameters

automatically from IP PBX WAN/LAN port; it saves a lot of time for administrator to configure

these settings manually.

Click

【

Network Settings

】

【

DHCP Server

】

4.5.1 DHCP Service

Item

Explanation

Enable

Enable DHCP service.

Interface

Choose the network port to implement DHCP service.

Summary of Contents for IPX-2100
















































































































































Search results

Summary of Contents for IPX-2100

Reviews:

Planet IPX-2100, User Manual, Page: 103 / 143

Search results

Summary of Contents for IPX-2100

Reviews: