Planet IPX-2100 User Manual Download

Page: 16 / 143

Internet Telephony PBX System

IPX-330/IPX-2100

Physical interfaces description

1 Reset

System reboot: Press less than 5 secs

Reset to Factory Default: Press over 6 secs.

12V DC

12V DC Power input outlet

3 LAN/WAN

The LAN/WAN port support auto negotiating Fast Ethernet

10/100BASE-TX networks. The WAN port allows your IP PBX to be

connected to an Internet Access device, e.g. router, cable modem,

ADSL modem, through a CAT.5 twisted pair Ethernet cable.

Console

Show information of system

5 USB

For external store device to store voice and voicemail

Slot 1/Slot 2

2 external slots with compliant FXO/FXS/GSM module.

FXO module is connected to PBX or CO line with RJ11 analog line.

FXO port is connected to the extension port of a PBX or directly

connected to a PSTN line of carrier.

FXS module is connected to Phone with RJ11 analog line. FXS port

is connected to your telephone sets, fax, or Trunk Line of PBX.

GSM module is connected to Global System for Mobile

Communications (GSM) with SIM Card.

Supporting 2 slots, user can buy expansion module like IPX-21FO (4FXO),

IPX-21SL (2FXO+2FXS) or IPX-21GS (4GSM) for extending port service.

Summary of Contents for IPX-2100
















































































































































Search results

Summary of Contents for IPX-2100

Reviews:

Related manuals for IPX-2100

Brands by name

Popular brands

Planet IPX-2100, User Manual

Search results

Summary of Contents for IPX-2100

Reviews:

Related manuals for IPX-2100

Brands by name

Popular brands