Planet ICS-11 Series User Manual Download

Page: 5 / 74

User’s Manual of ICS-11x Serial Device Server Series

1. INTRODUCTION

Thank you for purchasing PLANET ICS-110/ICS-115A/ ICS-120 Serial Device Server. “Serial Server” is used as an alternative

name in this User's Manual.

ICS-110

1-Port RS232/422/485 Serial Device Server

ICS-115A

1-Port RS232/422/485 Serial Device Server with 1-Port 100BASE-FX SFP

ICS-120

2-Port RS232/422/485 Serial Device Server

“

Serial Server

” mentioned in this Guide refers to the ICS-110/ICS-115A/ ICS-120.

1.1 Packet Contents

Open the box of the Serial Server and carefully unpack it. The box should contain the following items:

The Serial Device Server x 1

User’s Manual x 1

External AC-DC Power Adapter x 1

If any of these are missing or damaged, please contact your dealer immediately; if possible, retain the carton including the

original packing material, and use them again to repack the product in case there is a need to return it to us for repair.

Summary of Contents for ICS-11 Series











































































Search results

Summary of Contents for ICS-11 Series

Reviews:

Related manuals for ICS-11 Series

Brands by name

Popular brands

Planet ICS-11 Series, User Manual

Search results

Summary of Contents for ICS-11 Series

Reviews:

Related manuals for ICS-11 Series

Brands by name

Popular brands