Planet ICS-11 Series, User Manual, Page: 46 / 74

User’s Manual of ICS-11x Serial Device Server Series
46
4.5.2 Operation mode
The serial server makes connected Serial equipment become IP-based. That also makes them able to connect to a TCP/IP
networking immediately. The serial server allows traditional Computer/Client COM ports access to a serial equipment anywhere
on the Ethernet LAN network.
This operation mode can be set up as Disable , Remote Pair Master/Slave , RF2217 , Serial Telnet , TCP Server , TCP Client ,
UDP , Virtual COM and Modbus Converter Server/Client . The operation mode screen in Figure 4-5-3 appears.
Figure 4-5-3: Operation Mode Screenshot
4.5.2.1 Disable mode
When selecting disabled operation mode, the device port can be disabled. The disable mode screen in Figure 4-5-4 appears.
Figure 4-5-4: Disable Mode Screenshot
Object Description
•
Apply to all serial
ports
To apply this configuration to all serial ports.
Buttons
: Click to apply port config changes.
When applying any configuration changes of serial server, it’s required to save changed
configuration and reboot system . Therefore the new configuration will be applied after rebooting.