manualshive.com logo in svg

Planet ICA-HM620, User Manual

Share
Download
Planet ICA-HM620 User Manual Download Page 93

Mask Clearing 

In this section, users can delete an existing Privacy Mask. Please select the Privacy Mask to be 

removed from the drop-down list, and press the button “Clear”. Then the selected Privacy Mask will 

readily disappear. 

 

4.5.8  Camera - Exposure 

In the Exposure Mode setting page, users can select either the “Full Auto” mode or adjust the 

parameter of the Shutter/Iris/Bright Priority mode for optimized video output in accordance with the 

operating environment. 

 

Shutter Priority Mode 

In this mode, it is shutter speed that takes main control of exposure. The range of shutter speed is from 

1/10000 to 1. 

 

Iris Priority Mode 

In this mode, it is iris that has premier priority in control of exposure. The value of iris is adjustable from 

F1.6 to F28. 

 

Manual Mode 

In this mode, users can change the Shutter speed (1/10000 to 1), Iris (F1.6 to F28), and Gain (1 to 15) 

manually. 

 

4.5.9  Camera - WB 

A camera needs to find reference color temperature, which is a way of measuring the quality of a light 

 - 

93 

- 

Summary of Contents for ICA-HM620














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands