Being capable of implementing local recording (through Micro SD card) when network failure happens,
the IP Camera could be a backup recording device for the surveillance system.
Detection Switch
You will be able to turn on/off Network Failure Detection in System section.
Default setting is Off.
Detection Type
Input the IP device address and the period of ping time to ping. The ping time
setting range is from 1 to 99 minutes.
Triggered Action (Multi-option)
The Administrator can specify alarm actions that will take when network failure
is detected. All options are listed as follows:
•
Enable Alarm Output 1/2
Check the items and select the predefined type of alarm output to enable alarm relay outputs when
tampering is detected.
•
Record stream to SD Card
Select this item and the Tampering Alarm recording will be stored in Micro SD/ SDHC card when
tampering is detected.
-
65
-
