manualshive.com logo in svg

Planet ICA 4200, User Manual

Share
Download
Planet ICA 4200 User Manual Download Page 51

 

Ultra-mini Full HD Fixed Dome IP Camera 

ICA-4200

 

 

 

51

3.5.14 Maintenance

 

You are able to upgrade firmware or reset this device to default setting on this page. 

 

 

Reboot 

Click this button to reboot the IP camera. This function is useful when 
you find IP camera is not working properly. 

Restart IP Camera 

Automatically 

The device will reboot automatically according to the schedule. Please 
make sure the 

Time

 setting is correct when this function is enable.   

Reset 

(1) Clear all settings of IP camera and reset to factory default setting. 
(2) Reset all parameters, except for the IP, time zone, and daylight 
saving parameters, to the original factory settings 

Backup 

Back up IP camera’s setting and save it on your computer. 

Back Up to SD 

Card Device 

Back up IP camera’s setting and save it on SD card. 

Restore 

Restore a previously-saved configuration file saved on your computer. 
Click the ‘Browse’ button to select the configuration file first and then 
click the ‘Restore’ button to upload settings. 

 

Please make sure you select the correct configuration file 
before you restore settings. If you upload the wrong file, the 
device might be damaged. 

 

 

Restore from SD 

Restore IP camera’s configuration which is previously-saved on SD 

Summary of Contents for ICA 4200





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands