manualshive.com logo in svg

Planet ICA 4200, User Manual

Share
Download
Planet ICA 4200 User Manual Download Page 10

 

Ultra-mini Full HD Fixed Dome IP Camera 

ICA-4200

 

 

 

10

Chapter 2.  Hardware Interface 

2.1 Physical Descriptions 

 

 

Interface 

Description

 

Audio In 

User can enable the function of the built-in microphone via audio 
setting in the Web UI. 

Ethernet Port (PoE) 

The LAN socket is an RJ45 connector for connection to 
10BASE-T Ethernet or 100BASE-TX Fast Ethernet cabling. Not 
only can this Ethernet port detect or negotiate the transmission 
speed of the network automatically but also input power for 
camera operation. Please use Category 5 cable to connect the 
Network Camera to an 802.3af PoE network switch. 

Lens 

1/2.5" Progressive Scan CMOS. 

DI 

Digital input. 

Micro-SD/SDHC Card 

Slot 

User can insert a micro SD card (up to 32G) into this slot for event 
recording. 

Reset Button 

This button is used to restore all the factory default settings. 
Sometimes restarting the camera will make the system return to a 
normal state. If the system still got problems after restart, user can 
restore the factory default settings and configure it again.   
 
To restore the device, please follow the steps below: 
1.  Press ‘Reset’ button for 5 seconds to reset the device to the 

factory default. 

2.  Login the camera using the default IP (

http://192.168.0.20

), 

with “admin” for both username and password.   

Restoring the factory default setting will lose all the 
previous settings including IP address forever. User 
needs to back up configuration file in advance before 
restoring.

 

 

Summary of Contents for ICA 4200





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands